1. Drivers Intel Nuc5cpyh
2. Downloads For Intel® NUC Kit NUC6CAYH - Drivers & Software
3. Yes, There Is A Driver In That Folder, For 'Intel(R) Celeron(R)/Pentium(R) SM Bus Controller - 2292' . Thats The Only Device Windows Cannot Find Dr...
4. Thank You For Your Answer But That Is Very Strange In My Opinion. If The Drivers Are Not Required Why They Are Listed As Drivers For NUC5CPYH? Why...
5. Downloads For Intel® NUC Kit NUC5PGYH - Drivers & Software
6. Hi CashGuy, The Information Provided By JFFulcrum Is Correct, Intel® Celeron® Processor Does Not Support RST Feature, Only Generic AHCI Regards!

Nov 17, 2015 Yes, there is a driver in that folder, for 'Intel(R) Celeron(R)/Pentium(R) SM Bus Controller - 2292'. Thats the only device Windows cannot find driver without Intel-provided inf file. This 'driver' is just a pad against exclamation signs in device manager (no drivers will be installed, just device will be named correctly). Download Intel NUC5CPYH NUC Kit Ethernet Driver 25.6 for Windows 10 64-bit (Network Card). Here are the options for keeping device drivers current:. Allow the Intel® Driver & Support Assistant (Intel® DSA) to detect out-of-date drivers. Manually download drivers, BIOS, and software from Download Center. O NUC5CPYH o NUC5PPYH The following device drivers and software are available. Intel® Chipset Device Software.

This package contains the files needed for installing the Gigabit Ethernet Network Connection driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

What's New in This Release:

- Support for FreeBSD 11.4.
- Removed DOS tools.

Drivers Intel Nuc5cpyh

Intel Ethernet 800 Series

- Fixed: Reading the module temperature sensor with NVM 2.10/2.12 gives an incorrect value for all methods that rely on firmware, including NCSI and PLDM. Users can expect reported temperature ranges from 0 to 255 with no consistency. QSFP modules with a temperature sensor whose module EEPROMs are aligned to specification SFF-8636, Revision 2.8 or newer could result in port shutdown that is only recoverable with a power cycle and a change of module.

General Intel Ethernet 700 Series Changes:

- Fixed: The Intel Ethernet Network Adapter X710-T2L/T4L and the Intel Ethernet Network Adapter X710-2/X710-4 pull-up in GLOBR creates a false FAN_ON_AUX.
- Fixed: Device returns different version of supported PLDM type 6.
- Fixed: Devices do not return Network Port schema data.
- Fixed: The FAN_ON_AUX signal doesn't change status when temperature crosses warning threshold.
- Fixed: Intel Ethernet Converged Network Adapter XL710-Q1/Q2 recovery fails on FreeBSD.
- Fixed: RDE device reports wrong MaxFrameSize value.
- Fixed: PCIeDevice PDR (recordHandle 4003) is missing in the list of retrieved PDRs.
- Fixed: RdeOperationInit on NetworkPort1 returns SUCCESS and didn't return BEJ.
- Fixed: For the Intel Ethernet Controller X710-TM4/AT2, setting the Link NCSI command to 2.5G/5G speed doesn't change the link properly.
- Fixed: The NCSI Get Temperature command might try to read temperature from a module that doesn't support temperature readings. This could lead to incorrect temperature handling as well as having an impact for handling platform events.

Intel Ethernet 700 Series Windows Driver:

- Fixed: On Windows Server 2012 R2 the host might suffer a BSOD after modifying ANS team type with tagged VLAN. It can be reproduced both with GUI or a Powershell command.

Intel Ethernet 700 Series Linux Driver:

- Fixed: MAC VLAN filters are not freed when the number of VFs changes. It is observed only when a limit of MAC VLAN filters have been reached before VF changes.
- Fixed: When the number of multicast MAC addresses configured on the VF reaches the limit of the network adapter, the VF cannot receive all multicast packets.
- Fixed: Maximum number of SR-IOV VFs is 62 (instead of 63) per port. This behavior is observed when the RSS and VMDq settings are disabled. It might be observed only when using ESX-ixgben driver.
- Fixed: Packets with assigned VLAN are not redirected to the correct queue set by the Intel Flow Director (FD) rule.
- Fixed: After setting DCB on Intel Ethernet Controller X710 adapters, traffic is not tagged with a priority tag.
- Fixed: When the second subordinate interface is added to the bonding, its MAC address becomes the same as the first added subordinate and bond interface. Reloading the PF driver and creating VFs again is needed to restore the MAC addresses.
- Fixed: Promiscuous mode trusted VF with VLAN port for unicast packets receiving additional Tx traffic of every other VFs assigned to the same PF.

Intel Ethernet 700 Series NVM Update Tool:

Downloads For Intel® NUC Kit NUC6CAYH - Drivers & Software

- Fixed: Minimum Security (Rollback) Revision (MinSREV) values and Security (Rollback) Revision (SREV) are not reported in unified (hexadecimal) format via the NVM Update Tool.

Yes, There Is A Driver In That Folder, For 'Intel(R) Celeron(R)/Pentium(R) SM Bus Controller - 2292' . Thats The Only Device Windows Cannot Find Dr...

Intel Ethernet 700 Series ProSet:

- Fixed: Use Default button in the UI is missing from the Locally Administered Address tab.

General Intel Ethernet 500 Series Changes:

- Fixed: FAN 7 rotates non-stop when 562FLR is installed and while in AUX power.
- Fixed: Maximum number of SR-IOV VFs is 62 (instead of 63) per port. This behavior is observed when the RSS and VMDq settings are disabled. It is observed only when using the ESX-ixgben driver. Fixed: Firmware installation failed for 562FLR-T.

Intel Ethernet 300 Series Windows Driver:

- Fixed: The Wake on LAN (WoL) feature doesn’t work on the Intel Ethernet Server Adapter I350 and Intel Ethernet Network Adapter I350 OCP 3.0. This issue occurs on ports 2 through 4.

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

Thank You For Your Answer But That Is Very Strange In My Opinion. If The Drivers Are Not Required Why They Are Listed As Drivers For NUC5CPYH? Why...

About Ethernet Drivers:

Downloads For Intel® NUC Kit NUC5PGYH - Drivers & Software

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.
However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.
If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product's lifetime, as well as include various other changes.
When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.
There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.
Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Hi CashGuy, The Information Provided By JFFulcrum Is Correct, Intel® Celeron® Processor Does Not Support RST Feature, Only Generic AHCI Regards!